Diagnostic Trouble Code Chart
CAUTION:
- During diagnosis, a DTC associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
- If the combination meter needs to be replaced as a result of troubleshooting, the current driving distance and elapsed days must be entered into the meter after the replacement in order to be used for service reminder function. Therefore, read "Integrated mileage for reminder," "Integrated days for reminder," "Mileage until Extra reminder," "Months until Extra reminder," and "Current schedule" from the meter before the replacement using the special function of scan tool (M.U.T.-IIISE), and note them. For the operation method of scan tool (M.U.T.-IIISE), refer to SERVICE REMINDER FUNCTION SET . If "Integrated mileage for reminder" or "Integrated days for reminder" cannot be read from the meter using scan tool (M.U.T.-IIISE), use the following method.
- As for the driving distance for check warning, use the driving distance displayed on the multi information display.
- As for the elapsed days for check warning, calculate the number of elapsed days from the delivery date to the customer (service reminder function start date) and current date.
| DTC No. | Diagnostic item |
|---|---|
| B1201 | Fuel information problem |
| B2463 | Rheostat switch sticking |
| B2464 | Meter information SW sticking |
| U0100 | Engine CAN timeout |
| U0141 | ETACS CAN timeout |
| U0159 | CAMERA CAN timeout <Vehicles with multi around monitor> |
| U0164 | A/C CAN timeout |
| U0230 | Power Gate CAN timeout <Vehicles with power liftgate> |
| U0245 | NAVI/DISP AUDIO CAN timeout <Vehicles with Smartphone Link Display Audio> |
| U1000 | OSS/KOS_OSS CAN timeout <Vehicles with KOS> |
| U1190 | No receive fault detect signal |
| U1195 | Coding not completed |