Warning Screen: FCM/LDW/AHB
| Display content | Message | Factor | Action procedure |
|---|---|---|---|
| - | Is displayed when your vehicle may collide with a vehicle-travelling-ahead or a pedestrian. | If the warning screen is not displayed normally or if the screen continues to be displayed, check the FCM/LDW/AHB-ECU DTC. (refer to DIAGNOSTIC TROUBLE CODE CHART .) | |
| FCM BRAKE ACTIVATED | Is displayed after the FCM turns off. | ||
| <Up to 20 Model year> <From 22 Model year> |
FCM SERVICE REQUIRED | Is displayed when the FCM is defective. | |
| <Up to 20 Model year> <From 22 Model year> |
FCM TEMPORARILY NOT AVAILABLE | Displayed when the FCM is inactive temporarily. | |
| - | Displayed when the FCM is deactivated. | If the warning screen is not displayed normally or if the screen continues to be displayed, carry out the troubleshooting for the FCM. (Refer to DIAGNOSIS .) | |
| - | A message will appear when the system enters the warning condition. | If the warning screen is not displayed normally or if the screen continues to be displayed, carry out the troubleshooting for the LDW. (refer to DIAGNOSTIC TROUBLE CODE CHART .) | |
| LDW SERVICE REQUIRED | Displayed when the LDW system is defective. | ||
| AHB SERVICE REQUIRED | Displayed when the automatic high beam system fails. | If the warning screen is not displayed normally or if the screen continues to be displayed, check the automatic high beam system troubleshooting. refer to DIAGNOSTIC TROUBLE CODE CHART . | |
| <Up to 20 Model year> DRIVER ASSISTANCE CAMERA SERVICE REQUIRED <From 22 Model year> DRIVER ASSISTANCE SYSTEM SERVICE REQUIRED | Displayed when the camera incorporated in the FCM/LDW/AHB-ECU fails. | If the warning screen is not displayed normally or if the screen continues to be displayed, check the FCM/LDW/automatic high beam system DTC. (refer to DIAGNOSTIC TROUBLE CODE CHART .) | |
| <Up to 20 Model year> DRIVER ASSISTANCE CAMERA TEMPORARILY NOT AVAILABLE <From 22 Model year> DRIVER ASSISTANCE SYSTEM TEMPORARILY NOT AVAILABLE |
Displayed when a system (FCM, automatic high beam system or LDW) is inoperational temporarily due to too high temperature in the FCM/LDW/AHB-ECU camera. | ||
| DRIVER ASSISTANCE CAMERA BLOCKED | Displayed when a system (FCM, automatic high beam system or LDW) is inoperational temporarily, because the FCM/LDW/AHB-ECU camera is contaminated or sunlight is reflected on the camera. | ||
| <ACC/FCM-ECU> | FCM RADAR BLOCKED | When the FCM system determines that it cannot detect objects properly, a message will appear on the information screen of the multi-information display. | If the warning screen is not displayed normally or if the screen continues to be displayed, check the FCM/LDW/automatic high beam system DTC. (refer to DIAGNOSTIC TROUBLE CODE CHART .) |
| UNCALIBRATED | Displayed when the camera in the FCM/LDW/AHB-ECU has not been calibrated yet. | ||
| CALIBRATING | Displayed when the camera in the FCM/LDW/AHB-ECU is being calibrated. |