Speedometer Check
CAUTION:
- Be sure to set the rear wheels on the free roller. (The vehicle may dash forward or the drive train may be damaged). <AWD>
- If the speedometer is checked using the speedometer tester, the DTC may be set in the ASC-ECU. Therefore, after the check is finished, erase the DTC set in the ASC-ECU.
- Do not accelerate or decelerate suddenly during servicing work.
- Check that the current tire inflation pressures meet the inflation pressure label.
- Press the ASC OFF switch for 3 seconds or more to stop the ASC operation.
- Set the vehicle on the speedometer tester.
- Chock the rear wheels and apply the parking brake <FWD>.
- Place the rear wheels on the free roller. <AWD>
- Chock the rear wheels and apply the parking brake <FWD>.
- To prevent front wheel lateral runout or vehicle sudden start, attach a chain or wire to the front and rear towing hooks and fix the other end of the chain or wire to the anchor plate.
- Check that the speedometer allowance range is within the standard value.
Standard value:
| Standard indicator km/h (mph) | Allowance range km/h (mph) |
|---|---|
| 40 (25) | 40.5 - 44.5 (25.5 - 28.5) |
| 80 (50) | 81.5 - 86.5 (50.5 - 53.5) |
| 120 (75) | 122.5 - 128.5 (76.0 - 80.0) |
| 160 (100) | 162.5 - 169.5 (101.5 - 106.5) |
| 200 (125) | 202.5 - 210.5 (127.0 - 133.0) |
| 240 (150) | 242.5 - 251.5 (152.5 - 159.5) |