FixVault
Home › Nissan-Datsun › 1985 › Stanza GL, Automatic › Repair and Diagnosis › Engine Performance › System › EFI Control System › Component Testing › Starter Switch (Code 32)

Starter Switch (Code 32)

  1. Disconnect 20-pin connector and measure the voltage between 9 and 5 (body ground). See Figure . Turn ignition switch to "START" position. If battery voltage is present, replace control unit.
  2. If there is no battery voltage, check harness and repair if necessary. If okay, check starting circuit and replace or repair if necessary. If okay, replace or charge battery.
About FixVault