Door Lock & Unlock Switch
Leave all connectors together. Check continuity between Green/Orange wire and ground and Green/Yellow wire and ground at keyless entry control module. See LOCK & UNLOCK CONTINUITY CHECK table. Repair any circuits which are open or shorted. If all circuits are okay, replace door lock and unlock switch.
LOCK & UNLOCK CONTINUITY CHECK
| Lock Switch Position | Wire At Keyless Entry Control Module |
|---|---|
| Drivers Side | |
| Lock | Green/Yellow |
| Unlock | Green/Orange |
| Passenger Side | |
| Lock | Green/Yellow |
| Unlock | Green/Orange |