FixVault
Home › Nissan-Datsun › 1994 › Sentra SE-R, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Overhaul - Re4F03V › Component Disassembly & Reassembly › Oil Pump › Reassembly

Oil Pump: Reassembly

  1. Using appropriate adapter, install NEW oil seal on oil pump housing. Apply ATF to NEW "O" ring and install "O" ring on oil pump housing. Install inner and outer gears on oil pump housing. Ensure inner gear is installed in same direction as removed.
  2. Wrap oil pump splines with masking tape to protect oil seal. Position oil pump cover on oil pump housing, then remove masking tape. Tighten bolts in numerical order to 62-97 INCH lbs. (7-11 N.m). See Figure. Pack ring groove with petroleum jelly, then carefully install NEW seal rings. Connect seal ring hooks. DO NOT  spread gap of seal ring excessively while installing as ring may become deformed.
About FixVault