Service Precautions

Observe these precautions when working with air bag systems:

• Disable SIR system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Failure to do this could result in accidental air bag deployment and personal injury.
• After repairs, turn ignition on from passenger side of vehicle to prevent injury in event of accidental air bag deployment. Ensure INFL REST indicator light is working properly and no system faults are indicated. See SYSTEM OPERATION CHECK .
• After air bag deployment, air bag surface may contain deposits of sodium hydroxide, which can irritate skin. Always wear safety glasses, rubber gloves and long-sleeved shirt during cleanup. Wash hands using mild soap and water.
• Never strike or jar sensor. All sensors and mounting bracket bolts must be carefully torqued to ensure proper sensor operation.
• Never apply power to SIR system if sensor is not rigidly attached to vehicle.
• To avoid air bag deployment and possible personal injury when trouble shooting SIR system, only use test equipment specified in diagnostic charts. Never use battery-powered test equipment or test light. Carefully follow all instructions.
• DO NOT perform repairs on any portion of SIR wiring circuit.
• Always carry air bag module with trim cover away from body. Always place inflatable module on workbench with trim cover up, away from loose objects.