Keypad Assembly
Press each button on keypad, and check continuity between Black wire and indicated wires at keypad. See KEYPAD CONTINUITY CHECK table. Replace keypad assembly if any problems are found.
KEYPAD CONTINUITY CHECK
| Keypad Pressed | (1) Continuity | ||
|---|---|---|---|
| 1/2 | Black Wire & Gray/Red Wire | ||
| 3/4 | Black Wire & Orange/Black Wire | ||
| 5/6 | Black Wire & Light Green/Red Wire | ||
| 7/8 | Black Wire & Green/Black Wire | ||
| 9/0 | Black Wire & Brown/Yellow Wire | ||
|
|||