Multi-Remote Control Switch Precautions (NTB95-112)
Publication date: 1995-11-15Reference number: NTB95-112
MULTI-REMOTE CONTROL SWITCH PRECAUTIONS
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB95-112, Date of Issue:
November 15, 1995
MULTI-REMOTE CONTROL SWITCH PRECAUTIONS
Model(s): All with Nissan multi-remote control systems
Classification: EL95-016
Section: Electrical
Bulletin No.: NTB95-112
Date: November 15, 1995
SERVICE INFORMATION
Observe the following precautions in the handling of Nissan
multi-remote control switches:
- Use the correct battery for replacement.
PARTS INFORMATION
AFTERMARKET BATTERY PART NUMBERAftermarket Battery Part Vehicle Model Remote CR2025 Maxima, 300ZX, 240SX CR2016 Sentra, 200SX, Quest NOTE: Do not use the CR2016 battery in any remotes except for Sentra, 200SX, and Quest. The CR2016 battery is slightly smaller and will cause intermittent contact in other Nissan multi-remote switches. - Use the correct programming procedure for the vehicle model. The procedures vary slightly from model to model. Refer to NTB95-093 (EL95-011) for details.
- Do not mix multi-remote switches on any individual vehicle. A vehicle may come in with two multi-remote switches, each of which is programmed to that particular vehicle. If you use a multi-remote switch from another vehicle, it will not operate. All of the customer's multi-remote switches, up to four, must be programmed to the vehicle at the same time because the programming procedures erase any previous programs.