Sensor Rotor: Installation

Install the sensor rotor. For front sensor rotor, use hammer and wooden block. For rear sensor rotor, use suitable drift and press.

• Always replace sensor rotor with new one.
  Fig 1: Installing Front Sensor Rotor

  
• Pay attention to the dimension of rear sensor rotor as shown in figure.
  1. Rear Disc 
     1. h: 1.5 - 2.5 mm (0.06 - 0.10 in) 
  2. Rear Drum 
     1. h: 17.7 - 18.7 mm (0.70 - 0.74 in) 

Fig 2: Installing Rear Sensor Rotor