Checking Fluid Leakage

Check lines for improper attachment, leaks, cracks, damage, chafing and deterioration.

1. Run engine between idle speed and 1000 RPM.
   • Make sure temperature of fluid in reservoir tank rises to 60 - 80°C (140 - 176°F).
2. Turn steering wheel right-to-left several times.
3. Hold steering wheel at each "lock" position for 5 seconds and carefully check for fluid leakage.
   CAUTION: Do not hold steering wheel at lock position for more than 15 seconds.
4. If fluid leakage from any line is noticed, loosen flare nut and then retighten.

   Do not overtighten connector as this can damage O-ring, washer and connector. 

5. If fluid leakage from power steering pump is noticed, check power steering pump. Refer to PRE-DISASSEMBLY INSPECTION  .
6. If fluid leakage from power steering gear is noticed, check power steering gear. Refer to INSPECTION AND ADJUSTMENT  .
   Fig 1: Checking Fluid Leakage

   Courtesy of NISSAN MOTOR CO., U.S.A.