Power Steering Oil Pump: Disassembly

CAUTION:

Parts which can be disassembled are strictly limited.
Never disassemble parts other than those specified.
Disassemble in as clean a place as possible.
Clean your hands before disassembly.
Do not use rags; use nylon cloths or paper towels.
When disassembling and reassembling, do not let foreign matter enter or contact the parts.

Remove snap ring, then draw drive shaft out.
- Be careful not to drop drive shaft .
  
  Fig 1: Drawing Drive Shaft Out
  Courtesy of NISSAN MOTOR CO., U.S.A.
Remove oil seal.
- Be careful not to damage front housing .
  
  Fig 2: Removing Oil Seal
  Courtesy of NISSAN MOTOR CO., U.S.A.
Remove connector and flow control valve with spring.
- Be careful not to drop flow control valve .
  
  Fig 3: Removing Connector And Flow Control Valve With Spring
  Courtesy of NISSAN MOTOR CO., U.S.A.