Trouble Diagnoses With Battery/Starting/Charging System Tester: Notes
NOTE:
To ensure a complete and thorough diagnosis, the battery, starter and generator test segments must be done as a set from start to finish.
- Turn off all loads on the vehicle electrical system.
- Perform battery test with Battery/Starting/Charging system tester.
- Press "ENTER" to begin the starting system test.
- Start the engine.
- Diagnosis result is displayed on the tester. Refer toDIAGNOSTIC RESULT ITEM CHART .NOTE:
- If the starter performs normally but the engine does not start, perform engine diagnosis.
- For intermittent "NO CRANK" or "NO STARTER OPERATION" incidents, refer to DIAGNOSTIC PROCEDURE 2 .