With Consult-II
WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch ON. (Do not start engine.)
- Select "ECU INPUT SIGNALS" or "MAIN SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II.
- Touch "START".
- Start engine.
- Run engine for at least 2 consecutive seconds at idle speed.
- If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".