FixVault
Home › Nissan-Datsun › 2002 › Sentra SE-R Spec V › Repair and Diagnosis › Transmission › Manual Trans › Manual Transaxle RS6F51H › Final Drive › Disassembly and Assembly › Disassembly

Disassembly and Assembly: Disassembly

  1. Remove mounting bolts. Then, separate the final gear from differential case.
  2. Remove speedometer drive gear.
  3. Using a drift and puller, remove differential side bearing (clutch housing side).
    Fig 1: Pressing Differential Side Bearing Off (Clutch Housing Side)
    G02023300Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Using a drift and puller, remove differential side bearing (transaxle case side).
    Fig 2: Pressing Differential Side Bearing Off (Transaxle Case Side)
    G02023301Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault