FixVault
Home › Nissan-Datsun › 2002 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 116 (Automatic Headlights) › Removal & Installation › Height Control Sensor › Installation

Height Control Sensor: Installation

WARNING: This page is about a different car, the 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the right rear height control sensor link with the 2 nuts. Tighten the nuts to 71 INCH Lbs. (8 N.m).
  2. Align the matchmark with the one on the right rear height control sensor sub-assembly and bracket.
  3. Install the right rear height control sensor sub-assembly. Tighten the nut to 48 INCH Lbs. (5.4 N.m).
  4. Connect the connector.
  5. Adjust the headlight aim only. See HEADLIGHT AIM  under ADJUSTMENTS.
About FixVault