FixVault

Component Inspection: Injector

WARNING: This page is about a different car, the 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect injector harness connector.
  2. Check resistance between terminals as shown in the figure.
    1. Resistance: 13.5 - 17.5ohm[at 10 - 60°C (50 - 140°F)] 
    Fig 1: Checking Resistance Between Injector Harness Connector Terminals
    G02361128Courtesy of NISSAN MOTOR CO., U.S.A.