FixVault
Home › Nissan-Datsun › 2002 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1832 (2004 - Brake Control System - Sedan) › Trouble Diagnosis › CONSULT-II Functions › Data Monitor › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
  3. Turn ignition switch ON.
  4. Touch "START" on display.
  5. Touch "ABS" on display.
    NOTE: Just after starting engine, or turning ignition switch ON, "ABS" may not be displayed on system selection screen even if "START" is touched. In this case, start again from step 1.
  6. Touch "DATA MONITOR".
  7. Return to monitor item selection screen, and touch any of "ECU INPUT SIGNALS", "MAIN SIGNALS", "SELECTION FROM MENU" or "CAN DIAGNOSIS SUPPORT MONITOR". Refer to "DISPLAY ITEM LIST  ".
  8. Touch "START".
  9. Screen of data monitor is displayed.
About FixVault