Cylinder Block
WARNING: This page is about a different car, the 2002 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BLOCK
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Cylinder Bore | |||||
| Standard Diameter | |||||
| Grade No. 1 | 3.7598-3.7602 (95.500-95.510) | ||||
| Grade No. 2 | 3.7602-3.7606 (95.510-95.520) | ||||
| Grade No. 3 | 3.7606-3.7610 (95.520-95.530) | ||||
| Maximum Taper | .0006 (.015) | ||||
| Maximum Out-Of-Round | .0006 (.015) | ||||
| Maximum Deck Warpage (1) | .004 (.10) | ||||
| Main Journal Inner Diameter Grade (Without Bearing) | |||||
| Journal Diameter | |||||
| Grade No. A | 2.5194-2.5194 (63.993-63.994) | ||||
| Grade No. B | 2.5194-2.5195 (63.994-63.995) | ||||
| Grade No. C | 2.5195-2.5195 (63.995-63.996) | ||||
| Grade No. D | 2.5195-2.5196 (63.996-63.997) | ||||
| Grade No. E | 2.5196-2.5196 (63.997-63.998) | ||||
| Grade No. F | 2.5196-2.5196 (63.998-63.999) | ||||
| Grade No. G | 2.5196-2.5197 (63.999-64.000) | ||||
| Grade No. H | 2.5197-2.5197 (64.000-64.001) | ||||
| Grade No. J | 2.5197-2.5198 (64.001-64.002) | ||||
| Grade No. K | 2.5198-2.5198 (64.002-64.003) | ||||
| Grade No. L | 2.5198-2.5198 (64.003-64.004) | ||||
| Grade No. M | 2.5198-2.5199 (64.004-64.005) | ||||
| Grade No. N | 2.5199-2.5199 (64.005-64.006) | ||||
| Grade No. P | 2.5199-2.5200 (64.006-64.007) | ||||
| Grade No. R | 2.5200-2.5200 (64.007-64.008) | ||||
| Grade No. S | 2.5200-2.5200 (64.008-64.009) | ||||
| Grade No. T | 2.5200-2.5201 (64.009-64.010) | ||||
| Grade No. U | 2.5201-2.5201 (64.010-64.011) | ||||
| Grade No. V | 2.5201-2.5202 (64.011-64.012) | ||||
| Grade No. W | 2.5202-2.5202 (64.012-64.013) | ||||
| Grade No. X | 2.5202-2.5202 (64.013-64.014) | ||||
| Grade No. Y | 2.5202-2.5203 (64.014-64.015) | ||||
| Grade No. 4 | 2.5203-2.5203 (64.015-64.016) | ||||
| Grade No. 7 | 2.5203-2.5203 (64.016-64.017) | ||||
|
|||||