FixVault
Home › Nissan-Datsun › 2002 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1874 (Manual Transmission) › Shift Control › Removal and Installation › Components › Removal

Removal and Installation: Components: Removal

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the shift knob.
  2. Remove the M/T finisher. Refer to "M/T FINISHER ".
  3. Remove the retaining plate and dust boot covers.
  4. Remove the clip (B) and then separate the boot from the control housing.
  5. Remove the guide plate bolts and then separate the guide plate.
  6. Remove the shift lever assembly and spring from the transmission.
About FixVault