FixVault

Component Inspection: Injector

WARNING: This page is about a different car, the 2005 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect injector harness connector.
  2. Check resistance between terminals as shown in the figure.
    1. Resistance: 13.5 - 17.5ohm [at 10 - 60°C (50 - 140°F)] 
    Fig 1: Checking Resistance Between Terminals
    G02358891Courtesy of NISSAN MOTOR CO., U.S.A.