FixVault
Home › Nissan-Datsun › 2002 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 2047 (Power Steering System) › Steering Column › Disassembly and Assembly › Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove spring from steering column assembly and tilt lever.
  2. Remove bolt from upper joint, then remove upper joint from steering column assembly.
    Fig 1: Removing Upper Joint From Steering Column Assembly
    G04906866Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove ignition switch tamper resistant self-shear type screws with a drill or other suitable tool.
About FixVault