5 A/T

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

When installing the transaxle to the engine, use the specified tightening torque in the numerical sequence as shown.

Fig 1: When Installing The Transaxle To The Engine, Use The Specified Tightening Torque In The Order Shown
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: 5 A/T Bolt Tightening Sequence
Courtesy of NISSAN MOTOR CO., U.S.A.
After installation, check the transaxle oil level, and check for any leaks and any loose mechanisms.
Install crankshaft position sensor (POS).
1. Crankshaft position sensor (POS) bolt: 8.4 - 10.8 N.m (0.86 - 0.98 kg-m, 74.6 - 95.5 in-lb)
Install idler pulley.
1. Idler pulley bolts: 23 - 31 N.m (2.5 - 3.2 kg-m, 18 - 23 ft-lb)