Transfer Control Unit Terminals And Reference Value
WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
Data are reference value and are measured between each terminal and ground.
CONNECTOR TERMINAL SPECIFICATION
| Terminal | Wire color | Item | Condition | Data (Approx.) | |
|---|---|---|---|---|---|
| 23 | R | ATP switch |
|
4WD shift switch: 4H to 4LO or 4LO to 4H (While actuator motor is operating.) | 0V |
| Except the above | Battery voltage | ||||
CAUTION:
When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.