FixVault
Home › Nissan-Datsun › 2002 › Sentra SE-R, Standard › Repair and Diagnosis › External Pages › Different car › Section 2128 (Body, Lock & Security System) › Back Door Lock › Back Door Power Lift Assembly › Removal

Back Door Power Lift Assembly: Removal

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH rear pillar upper finisher. Refer to "REAR PILLAR UPPER FINISHER ".
  2. Remove the closure rod to door bolt.
  3. Remove the back door motor gear assembly.
  4. Remove the back door motor.
    • Disconnect the electrical connector.
About FixVault