Diagnostic Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK DTC
With CONSULT-II
1. Turn ignition switch ON and select SELF DIAGNOSIS mode for A/T with CONSULT-II.
2. Move selector lever to R position.
3. Depress accelerator pedal (Full throttle position).
4. Touch ERASE.
5. Turn ignition switch OFF position for 10 seconds.
Perform DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE . Is the CONT UNIT (EEP ROM) displayed again?
1. Yes: Replace TCM.
2. No: INSPECTION END