Section 7 (Engine Cooling System QG18DE): Radiator: Inspection

WARNING: This page is about a different variant/trim than selected.

Apply pressure with Tool.
Specified pressure value: 157 kPa (1.6 kg/cm ² , 23 psi)

WARNING: To prevent the risk of the hose coming undone while under pressure, securely fasten it down with a hose clamp. Attach a hose to the oil cooler as well (A/T model only).

Fig 1: Pressure Testing Radiator
Courtesy of NISSAN MOTOR CO., U.S.A.
Check for leaks.

Fig 2: Leak Testing Radiator
Courtesy of NISSAN MOTOR CO., U.S.A.