FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R Spec V › Repair and Diagnosis › External Pages › Different car › Section 403 (Engine Control System) › DTC P0122, P0123: TP Sensor › DTC Confirmation Procedure › With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 1 second.
  4. If DTC is detected, go to DIAGNOSTIC PROCEDURE .
About FixVault