Changing Engine Oil

WARNING:

Be careful not to burn yourself, as the engine oil may be hot.
Prolonged and repeated contact with used engine oil may cause skin cancer: try to avoid direct skin contact with used oil. if skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.

Warm up engine, and check for oil leakage from engine components.
Stop engine and wait for 10 minutes.
Remove drain plug and oil filler cap to drain the oil.

Fig 1: Removing Drain Plug & Oil Filler Cap To Drain Oil
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove the oil filter and install a new filter.
Install the oil pan drain plug with a new washer.
1. Oil pan drain plug: 29 - 39 N.m (3.0 - 4.0 kg.m, 22 - 29 ft.lb)
CAUTION:
- Clean the oil drain plug and install with a new washer.
Fill the engine with oil.
- Refer to FLUIDS & LUBRICANTS .
  
  Fig 2: Oil Capacity Chart
  Courtesy of NISSAN MOTOR CO., U.S.A.
- The refill capacity depends on the oil temperature and drain time. Use these specifications for reference only.
- Always use the dipstick to the determine when the proper amount of oil is in the engine.
Warm up the engine and check the area around the oil drain plug and oil filter for oil leakage.
Stop the engine and wait for 10 minutes.
Check the oil level using the dipstick. Refer to ENGINE OIL .