FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1136 (Auto Light System) › Auto Light System › CONSULT-II Functions (IPDM E/R) › Active Test › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "ACTIVE TEST' on "SELECT DIAG MODE" screen.
  2. Touch item to be tested, and check operation.
  3. Touch "START".
  4. Touch "STOP" while testing to stop the operation.
    ACTIVE TEST OPERATION PROCEDURE CHART

    Test item CONSULT-II screen display Description
    Headlamp relay (HI, LO) output LAMPS Allows headlamp relay (HI, LO) to operate by switching operation (OFF, HI ON, LO ON) at your option.
    Front fog lamp relay output Allows fog lamp relay to operate by switching operation ON-OFF at your option.
    Tail lamp relay output TAIL LAMP Allows tail lamp relay to operate by switching operation ON-OFF at your option.
About FixVault