ASCD Brake Switch

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect ASCD brake switch harness connector.
Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.

Fig 1: ASCD Brake Switch Terminals Continuity Condition
Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD brake switch installation, refer to 4 STOPLIGHT SWITCH & AUTOMATIC SPEED CONTROL DEVICE SWITCH and perform step 3 again.

Fig 2: Checking Harness Continuity Between ASCD Brake Switch Terminals 1 And 2
Courtesy of NISSAN MOTOR CO., U.S.A.