FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1438 (Seat) › Automatic Drive Positioner › Check CAN Communication System Inspection

Check CAN Communication System Inspection

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SELF-DIAGNOSTIC RESULT 
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
    1. Connect CONSULT-II, and turn ignition switch ON.
    2. Touch "AUTO DRIVE POS." on "SELECT SYSTEM" screen.
    3. Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
    4. Check display content in self-diagnostic results.

    Displayed U1000? 

    1. Yes : GO TO "PRECAUTIONS WHEN USING CONSULT-II ".
    2. No : Inspection END.
About FixVault