FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1687 (Glass, Window System & Mirrors) › Power Window System › Limit Switch Circuit Check Front RH

Limit Switch Circuit Check Front RH

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH LIMIT SIGNAL 
    1. Turn ignition switch ON.
    2. Check voltage between power window and door lock/unlock switch RH connector D105 terminal 15 and ground.
      Fig 1: Checking Voltage Between Power Window And Door Lock/Unlock Switch RH Connector D105 Terminal 15 And Ground
      G04187820Courtesy of NISSAN MOTOR CO., U.S.A.
      VOLTAGE CHECK

      Connector Terminals Condition Voltage (V) (Approx.)
      (+) (-)
      D105 15 Ground Front power window RH is between fully-open and just before fully-closed position (ON) 0
      Front power window RH is between just before fully closed position and fully closed position (OFF) 5

    OK or NG 

    OK: Limit switch circuit is OK.

    NG: GO TO 2.

  2. CHECK FRONT POWER WINDOW MOTOR RH LIMIT SIGNAL 
    1. Turn ignition switch OFF.
    2. Disconnect front power window motor RH.
    3. Turn ignition switch ON.
    4. Check voltage between front power window motor RH connector D104 terminal 5 and ground.

      5 - Ground: Approx. 5V 

      Fig 2: Checking Voltage Between Front Power Window Motor RH Connector D104 Terminal 5 And Ground
      G04187821Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 3.

    NG: GO TO  5.

  3. CHECK LIMIT SWITCH GROUND CIRCUIT 

    Check continuity between front power window motor RH connector D104 terminal 6 and ground.

    6 - Ground: Continuity should exist. 

    Fig 3: Checking Resistance Between Terminal 6 And Ground
    G04135295Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Replace front power window motor RH. Refer to "FRONT DOOR GLASS AND REGULATOR ".

    NG: GO TO 4.

  4. CHECK HARNESS CONTINUITY 
    1. Disconnect power window and door lock/unlock switch RH.
    2. Check continuity between front power window motor RH connector D104 terminal 6 and power window and door lock/unlock switch RH connector D105 terminal 3.

      6 - 3: Continuity should exist. 

      Fig 4: Checking Continuity Between Front Power Window Motor RH Connector D104 Terminal 6 And Power Window And Door Lock/Unlock Switch RH Connector D105 Terminal 3
      G04187823Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Replace power window and door lock/unlock switch RH. Refer to "FRONT DOOR ".

    NG: Repair or replace harness.

  5. CHECK HARNESS CONTINUITY 
    1. Disconnect power window and door lock/unlock switch RH.
    2. Check continuity between power window and door lock/unlock switch RH connector D105 terminal 15 and front power window motor RH connector D104 terminal 5.

      15 - 5: Continuity should exist. 

      Fig 5: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector D105 Terminal 15 And Front Power Window Motor RH Connector D104 Terminal 5
      G04187824Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Replace power window and door lock/unlock switch RH. Refer to "FRONT DOOR ".

    NG: Repair or replace harness.

About FixVault