FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1713 (Transfer Case) › TX15B › Shift Control › Disassembly and Assembly › Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the snap ring.
    Fig 1: Identifying Snap Ring And Retaining Pin
    G04174992Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove the retaining pin.
  3. Remove the drum cam from the control shift rod.
  4. Remove the retaining pin from the L-H shift rod.
    Fig 2: Identifying Retaining Pin
    G04174993Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove the 2-4 shift bracket.
  6. Remove the retaining ring from the 2-4 shift fork using suitable tool.
    Fig 3: Removing Retaining Ring From 2-4 Shift Fork Using Suitable Tool
    G04174994Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Remove the fork guide collar and 2-4 shift fork spring from the 2- 4 shift fork.
About FixVault