FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1837 (Instrument Panel) › Instrument Panel Assembly › Removal and Installation › Removal › Notes

Removal and Installation: Removal: Notes

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative and positive terminals.
  2. Remove the center console lower cover.
  3. Remove shift knob. Refer to , "SELECTOR KNOB " (RE4F04B) or , "SELECTOR KNOB " (RE5F22A).
  4. Remove cluster lid C. Refer to , "CLUSTER LID C ".
  5. Remove instrument lower panel LH. Refer to , "REMOVAL ".
  6. Remove storage tray.
  7. Remove glove box. Refer to , "GLOVE BOX ".
  8. Remove center console side finisher LH.
  9. Remove center console.
  10. Disconnect center console electrical connectors.
  11. Remove combination meter. Refer to , "COMBINATION METER ".
  12. Disconnect center speaker.
  13. Disconnect GPS antenna.
  14. Remove steering column. Refer to , "STEERING COLUMN ".
  15. Remove defrost grille.
  16. Remove side defroster assemblies LH and RH.
  17. Remove side ventilator assemblies LH and RH.
  18. Remove front pillar finishers LH and RH.
  19. Remove instrument panel assembly.
About FixVault