FixVault

Unlock Warning Switch: Inspection

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY 
    1. Measure the resistance of the switch.

    Standard resistance 

    TESTER CONNECTION - SPECIFIED CONDITION (RESISTANCE)

    Tester Connection Switch Condition Specified Condition
    1 - 2 Pushed Below 1 Ω
    Not pushed 10 kΩ or higher

    If the result is not as specified, replace the switch assembly.

    Fig 1: Inspecting Unlock Warning Switch Assembly
    G04224099Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002