FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1976 (Engine Control System - VK45DE) › DTC P1144, P1164: Ho2S1 › Overall Function Check › With GST

With GST

WARNING: This page is about a different car, the 2005 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operating temperature.
  2. Set voltmeter probes between ECM terminal 16 [HO2S1 (B1) signal] 35 [HO2S1 (B2) signal] and ground.
  3. Check one of the following with engine speed held at 2,000 RPM constant under no load.
    • The maximum voltage is below 0.8V at least 1 time.
    • The minimum voltage is below 0.35V at least 1 time.
  4. If NG, go to "DIAGNOSTIC PROCEDURE  ".
    Fig 1: Setting Voltmeter Probes Between ECM Terminal 16 [Ho2S1 (B1) Signal] 35 [Ho2S1 (B2) Signal] And Ground
    G02361970Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault