Intelligent Power Distribution Module: Removal

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove 2 bolts and position coolant reservoir aside. See Fig 1.
Remove IPDM upper cover.
Remove IPDM harness cover. See Fig 2.
Release 2 clips and pull IPDM up from case. See Fig 3.
Disconnect IPDM connectors and then remove it.

Fig 1: Removing Coolant Reservoir

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Removing IPDM Harness Cover

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Identifying IPDM Retaining Clips

Courtesy of NISSAN MOTOR CO., U.S.A.