FixVault

Intake Sensor

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

After disconnecting intake sensor connector, measure resistance between terminals 1 and 2 at sensor harness side, using the table below.

TEMPERATURE AND RESISTANCE CHART

Temperature °C (°F) Resistance kΩ
-15 (5) 209.0
-10 (14) 160.0
-5 (23) 123.0
0 (32) 95.8
5 (41) 74.9
10 (50) 58.9
15 (59) 46.7
20 (68) 37.3
25 (77) 30.0
30 (86) 24.2
35 (95) 19.7
40 (104) 16.1
45 (113) 13.2

If NG, replace intake sensor.

Fig 1: Measuring Resistance Between Terminals 1 And 2
G04896277