Door Mirror Remote Control Switch Ground Circuit Inspection

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DOOR MIRROR REMOTE CONTROL SWITCH GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect door mirror remote control switch.
3. Check continuity between door mirror remote control switch connector M159 terminal 13 and ground.
  13 - Ground : Continuity should exist.
  
  Fig 1: Checking Continuity Between Door Mirror Remote Control Switch Connector M159 Terminal 13 And Ground
OK or NG

OK: Check the condition of the harness and the connector.

NG: Repair or replace harness.