FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 212 (Air Bag Restraint Systems) › Diagnostics › Retrieving Codes › Intermittent Codes Using Consult Tester

Intermittent Codes Using Consult Tester

WARNING: This page is about a different car, the 2003 Infiniti QX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Connect CONSULT tester to Data Link Connector (DLC), located under left side of instrument panel. See Figure . Turn ignition on. Touch START (NISSAN BASED VHCL) on CONSULT tester. Touch AIRBAG. Touch SELF-DIAG (PAST). If diagnostic codes are displayed, go to step  3 . If no diagnostic codes are displayed, go to next step.
  2. Touch BACK until SELECT DIAG MODE appears. Touch TROUBLE DIAG RECORD. Diagnostic code previously erased will be displayed. Go to next step.
  3. Touch PRINT. Compare codes to intermittent fault messages. See INTERMITTENT FAULT MESSAGES  . Touch BACK until SELECT SYSTEM appears. Turn ignition off. Turn off CONSULT tester. Disconnect CONSULT tester from DLC. Disconnect both battery cables. After repair is complete, perform final check. Go to FINAL CHECK  .
About FixVault