FixVault

5. Check Injectors

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Stop engine and then turn ignition switch ON.
  2. Check voltage between ECM terminals 5, 6, 7, 13, 14, 15, 16, 17 and ground with CONSULT-II or tester.
    Fig 1: Checking Voltage Between ECM Terminals & Ground
    G00796011Courtesy of NISSAN MOTOR CO., U.S.A.

    Voltage: Battery voltage 

  3. Refer to WIRING DIAGRAM  for Injectors.

OK or NG 

  1. OK: GO TO 6.
  2. NG: Perform DIAGNOSTIC PROCEDURE  .