FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 414 (Engine Control System - DTC) › DTC P0605: ECM › DTC Confirmation Procedure › Procedure For Malfunction C › With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON and wait at least 1 second.
  4. Repeat step 2 to 3 for 32 times
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault