FixVault

VIAS Control Solenoid Valve

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II 

  1. Reconnect harness connectors disconnected.
  2. Turn ignition switch ON.
  3. Perform "VIAS SOL VALVE" in "ACTIVE TEST" mode.
  4. Check air passage continuity and operation delay time under the following conditions.
    Fig 1: Continuity Specification Chart
    G00783005Courtesy of NISSAN MOTOR CO., U.S.A.

Operation takes less than 1 second. 

Fig 2: Displaying "VIAS SOL VALVE" In "ACTIVE TEST" Mode
G00783006Courtesy of NISSAN MOTOR CO., U.S.A.