FixVault

Ignition Signal Check

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. IGNITION SIGNAL CHECK 
    1. Turn the ignition switch ON.
    2. Check voltage between NAVI control unit and ground.
      TERMINAL

      Terminals Ignition switch position
      (+) (-)
      Connector Terminal (wire color) ON OFF
      M58 27(Y/G) Ground Battery voltage Approx. 0V
      Fig 1: Checking Voltage Between NAVI Control Unit And Ground
      G03328583Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG

    1. OK: Replace NAVI control unit.
    2. NG: Check harness for open or short between NAVI control unit and fuse.