FixVault
Home › Nissan-Datsun › 2003 › Sentra SE-R, Standard › Repair and Diagnosis › External Pages › Different car › Section 1415 (Engine Control System - VQ35DE) › DTC P1217: Engine Over Temperature › Overall Function Check › With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the coolant level in the reservoir tank and radiator. Allow engine to cool before checking coolant level.  If the coolant level in the reservoir tank and/or radiator is below the proper range, skip the following steps and go to "PROCEDURE A  ".
  2. Confirm whether customer filled the coolant or not. If customer filled the coolant, skip the following steps and go to "PROCEDURE A  ".
  3. Turn ignition switch ON.
    Fig 1: Identifying Coolant Level In The Reservoir Tank
    G02360790Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-II.
  5. If the results are NG, go to "PROCEDURE A  ".
    Fig 2: Active Test Scan Tool Display
    G02360791Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault