With Consult-II

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch ON. (Do not start engine.)
Select "ECU INPUT SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II.
Touch "START".
Start engine and let it idle for 1 second.
If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

Fig 1: Identifying Display - Select System
Courtesy of NISSAN MOTOR CO., U.S.A.