Sliding Switch and Reclining Switch Ground Circuit Check

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK POWER SEAT SWITCH GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect power seat switch connector.
3. Check continuity between power seat switch connector B154 terminal 61D and ground.
  1. 61D (B/Y) - Ground : Continuity should exist.
OK or NG
1. OK : Check the condition of the harness and connector.
2. NG : Repair or replace harness between power seat switch and ground.
Fig 1: Checking Continuity Between Terminal 61D And Ground
Courtesy of NISSAN MOTOR CO., U.S.A.