Component Inspection
WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch "OFF". (Stay for at least 5 seconds.)
- Disconnect 4LO switch harness connector.
- Remove 4LO switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
- Push and release 4LO switch and check continuity between 4LO switch terminals 12 and 13.4LO SWITCH TERMINALS 12 AND 13 CONTINUITY SPECIFICATIONS
Terminal Condition Continuity 12 - 13 Push 4LO switch Yes Release 4LO switch No - If NG, replace the 4LO switch. Refer to "LOCATION OF ELECTRICAL PARTS ".