Component Inspection
WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch "OFF". (Stay for at least 5 seconds.)
- Disconnect neutral position switch harness connector.
- Remove neutral position switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
- Push and release neutral position switch and check continuity between neutral position switch terminals 1 and 2.NEUTRAL POSITION SWITCH TERMINALS 1 AND 2 CONTINUITY SPECIFICATIONS
Terminal Condition Continuity 1 - 2 Push neutral position switch Yes Release neutral position switch No - If NG, replace the neutral position switch. Refer to "LOCATION OF ELECTRICAL PARTS ".